OVER 10 YEARS
OF EXPERIENCE

Factors to Consider When Choosing a Die Casting Tool

If you want to manufacture metal parts, you’ll need a die-casting tool. The right Die Casting Tool can help you achieve a variety of desired outcomes. Here are some factors to consider when choosing a die-casting tool. They include the size of the tool, cooling rate, ejector pin placement, and cost.

Die Casting

Die casting tool volume is a key factor in determining the cost of die casting. It depends on the size of the die cavity, the material density, and the maximum wall thickness of the part. Generally, thinner parts require larger channels so that the metal can fill them faster. Larger channels will result in higher costs, but the additional material will typically be less than the cost of reduced volume.

High-pressure die casting is a good choice for high-volume production. The resulting castings have excellent dimensional accuracy and smooth surfaces. The production process can be done very quickly and efficiently. In addition, high-pressure die casting requires very little machining. The process is also cost-effective, and die-casting tools can be easily customized.

Die casting is a method of metal casting in which molten metal is forced into a cavity in a metal die. Similar to the plastic manufacturing process of injection molding, metal dies casting produces consistent, high-quality pieces. This method has a high initial investment but lower day-to-day costs.

Because of its large build area and wide range of material options, die casting is a versatile process. It is also capable of making thin-walled, repeatable parts. Die casting is particularly popular in the automotive industry because it can produce lightweight parts. Its heat and corrosion-resistant properties make it an excellent choice for fuel/air delivery components, seat frames, and panels. Moreover, it reduces fuel use.

A die-casting tool’s cooling rate is an important consideration. This process determines the amount of heat that will be transferred into the die, which affects its quality. The higher the temperature, the faster the die can reach its steady-state temperature. In addition, pre-heating the die reduces the rate of rejected castings by up to 50%.

The temperature of the die will also be affected by the flow rate of the fluid. Water and oil have better heat transfer coefficients, and a higher flow rate of oil will decrease the die temperature. However, it is not necessary to reduce the flow rate to ensure a longer die life. The temperature of the cooling medium should be set to a maximum of 230degC.

Optimizing the cooling rate of a die is essential in reducing tool damage and increasing service life. The heat balance of the die is directly related to the part quality and cycle time. Insufficient cooling rates may increase the risk of bainite formation, which reduces toughness and mechanical performance.

Another aspect to consider is the material used to form the die. The material used in a die can be a variety of metals, including high-grade tool steel. High-grade tool steel is the most common, but there are low-carbon steels available, which are more resistant to cracking. Some common metals that are commonly used for dies are vanadium and tungsten.

The time needed to close the die will vary depending on the machine used. Larger machines will require more time than smaller ones. The dry cycle time of the machine can be used as a guideline. A larger machine will take longer to close the die, but smaller ones will be faster. The faster the die closes, the better the product.

A die’s cooling rate is a key consideration during die casting. Once the molten metal enters the cavity of the die, it will begin to cool and solidify. During this time, the die cannot be opened. This time can be estimated by knowing the maximum wall thickness of the casting and its thermodynamic properties. Additionally, the complexity of the die’s geometry can add to the cooling time.

The ejector pin is the mechanical component that pushes a cast part out of the tool. The proper placement is essential to minimize flash. As a result, the ejector pins should be positioned away from critical surfaces. The pins leave a witness mark, which often leaves a small amount of flash around the pin mark. In addition to flash, the ejector pins can also be designed to allow for an as-cast finish or a protective coating.

The location of an ejector pin depends on the geometry and size of the casting. Pin marks can be raised or depressed by as much as 0.015 inches, but most foundries prefer to leave them raised for optimum production. To minimize ejector marks, an OEM should work with a die caster to determine the ejector pin placement.